HYSS GROUP- Strip,Coil,Sheet,Pipes Fittings,Flang,Seamless Pipe,Welded Tube,Bar

45°elbows long radiusStandard Weight, Extra Strong, Schedule 160,Double Extra StrongCarbon and ferritic alloy steel, carbon , stainlessduplex and alloy steel, ASTM A-234, ASME/ANSI Bl6.9,ASTM A-234,A403, A420,A8 15,ASME/ANSI Bl6.9.

NPS DN		Outside Diameter at Bevel O.D. (mm)	Centre to End Nominal A (mm)	SCHEDULE 160			DOUBLE EXTRA STRONG
NPS DN		Outside Diameter at Bevel O.D. (mm)	Centre to End Nominal A (mm)	Inside Diameter l.D. (mm)	Wall Thickness T (mm)	Approx. Weight (kg)	Inside Diameter l.D. (mm)	Wall Thickness T (mm)	Approx. Weight (kg)
1/2	15	21	16	-	-	-	-	-	-
3/4	20	27	11	-	-	-	11.02	7.82	.08
1	25	33	22	20.70	6.35	.17	15.21	9.09	.18
1 1/4	32	42	25	29.46	6.35	.23	22.76	9.70	.25
1 1/2	40	48	29	34.00	7.14	.45	27.94	10.16	.52
2	50	60	35	42.85	8.74	.79	38.18	11.07	.96
2 1/2	65	73	44	53.98	9.53	1.35	44.98	14.02	1.7
3	80	89	51	66.65	11.13	2.0	58.42	15.24	2.6
3 1/2	90	102	57	-	-	-	69.29	16.15	3.9
4	100	114	64	87.33	13.49	4.3	80.06	17.12	4.8
5	125	141	79	109.55	15.88	7.65	103.20	19.05	8.6
6	150	168	95	131.80	18.26	13.5	124.38	21.95	14.4
8	200	219	127	173.05	23.01	29	174.63	22.23	27.0
10	250	273	150	215.90	28.58	61	-	-	-
12	300	324	190	257.20	33.32	104	-	-	-
14	350	356	222	284.20	35.71	125	-	-	-
16	400	406	254	325.40	40.49	187	-	-	-

NPS DN		Outsid Diameter at Bevel O.D. (mm)	Centre to End Nominal A (mm)	SCHEDULE 160			DOUBLE EXTRA STRONG
NPS DN		Outsid Diameter at Bevel O.D. (mm)	Centre to End Nominal A (mm)	Inside Diameter l.D. (mm)	Wall Thickness T (mm)	Approx. Weight (kg)	Inside Diameter l.D. (mm)	Wall Thickness T (mm)	Approx. Weight (kg)
1/2	15	21	16	-	-	-	-	-	-
3/4	20	27	11	-	-	-	11.02	7.82	.08
1	25	33	22	20.70	6.35	.17	15.21	9.09	.18
1 1/4	32	42	25	29.46	6.35	.23	22.76	9.70	.25
1 1/2	40	48	29	34.00	7.14	.45	27.94	10.16	.52
2	50	60	35	42.85	8.74	.79	38.18	11.07	.96
2 1/2	65	73	44	53.98	9.53	1.35	44.98	14.02	1.7
3	80	89	51	66.65	11.13	2.0	58.42	15.24	2.6
3 1/2	90	102	57	-	-	-	69.29	16.15	3.9
4	100	114	64	87.33	13.49	4.3	80.06	17.12	4.8
5	125	141	79	109.55	15.88	7.65	103.20	19.05	8.6
6	150	168	95	131.80	18.26	13.5	124.38	21.95	14.4
8	200	219	127	173.05	23.01	29	174.63	22.23	27.0
10	250	273	150	215.90	28.58	61	-	-	-
12	300	324	190	257.20	33.32	104	-	-	-
14	350	356	222	284.20	35.71	125	-	-	-
16	400	406	254	325.40	40.49	187	-	-	-

Notes:

*NPS 3 -1/2 (DN 90) XXS is not specified in ASME/ANSIB36.10M.Produced from x-rayed,stress relieved welded pipe.Welds are 100% radio graphed inaccordance with the requirements of AME Boiler and Pressure Vessel Code.

MENU

Butt-Welding Fittings

PURCHASE